Jaw-Jaw Turnbuckles

Jaw-Jaw turnbuckles can be used to tension shade-sails of all sizes*. Having a captured pin at each end of the jaw-fork makes the fixing very strong. Our Jaw-Jaw turnbuckles are 316 grade stainless steel.

The design consists of two threaded AISI 316 grade stainless steel forged Jaw, forged Eye or welded Hook Terminals screwed into each end of a forged stainless steel frame. One end of the Turnbuckle is threaded left-hand and the other threaded right-hand allowing the tension to be adjusted by rotating the frame. This permits both the stainless steel Terminals to be screwed in or out simultaneously.

It is important to match the Jaw Size to the Eyebolt Size. Typically a 16mm Turnbuckle matches a 16mm Eyebolt. If you are not sure, call us to check. Eyenut bolts not welded eyebolts are recommended for use with Jaw-Jaw turnbuckles. Please review the load ratings below to choose the size most suitable for your job.

Note: 16mm Jaw-Jaw turnbuckles are a ultra-premium product this is reflected in the price difference.

SIZES

Thread Size	A	H	MINIMUM LENGTH	MAXIMUM LENGTH	BREAKING LOAD
10mm	12	12	35	340	3450kg
12mm	15	21	320	455	5000kg
16mm	17	27	355	570	8000kg
*It is the Purchasers’ responsibility to determine whether the testing procedure and breaking load is suitable for purpose. For shade sails with spans over 10 metres we recommend that the customer seek engineering advice regarding specific loadings and the suitability of this product.

FINAL COMMENTS

You’ll find additional information about this product by using the Tabs at the top of the page. Of course you’re always welcome to call us during normal business hours on Free-call 1800 155 233.