The Sunhaven is supported by a strong aluminium frame outfitted with stainless steel hardware to create a completely rust resistant umbrella that will be welcome by the pool, waterfront, entertainment area or on a deck. A resilient 75x100mm mast is connected to the foot-pedal that activates the 360° rotation mechanism and an easily accessed multi-use handle and detachable crank winder which has been fatigue-tested to ensure longevity. This intuitive handle is used not only to open the canopy but it also introduces a left-right tilt to domestic cantilever umbrellas in this size range! It also adjusts the Sunhaven’s unique vertical tilt which is limitless thanks to the infinite track spine in the mast which allows the heavy duty boom arm to stop anywhere along its length.
The UPF50+ Acrylic Canopy of this outstanding cantilever umbrella is made with a highly water-resistant solution-dyed fabric that will stand the test of time and resist fading for many years. To prevent age and use-related wear, it is reinforced with webbing at the rib ends and held in place with stainless steel screws. This also means that the canopy can easily be replaced should it ever become damaged.
This umbrella has a wide range of base options to choose from. In the interest of minimising parts that are often wind up unused as well as our carbon footprint, no base is automatically included with the umbrella, but rather you select the base you require and receive a single base only.
FEATURES
-
Rust resistant high quality aluminium frame
-
Stainless steel fittings
-
Choice of matte charcoal powdercoated frame or matte silver anodised finished frame
-
360° rotation
-
Horizontal left-right tilt
-
Infinite vertical tilt
-
Detachable crank winder
-
UPF50+ acrylic solution-dyed canopy
-
Fade resistant
-
40 km/h wind rating
-
Protective polyester waterproof cover to protect umbrella when not in use
-
Large variety of base options
-
Detachable central light accessory optional
While this umbrella has passed a wind rating test of 40km/h, this is more suitably used as a comparative guide on the strength of the umbrella. It is not suggested to leave this umbrella open in winds up to 40km/h. This is because the wind tunnel test is done with a consistent, even wind coming from an optimal direction. Windy conditions are not this consistent; they are unpredictable and gusty. All cantilever umbrellas should be collapsed in breezy conditions. Wind damage is NOT covered by warranty.
SHAPES AND SIZES
The Sunhaven is available in the following configurations:
-
3.0 x 3.0m Square
-
3.5m Octagonal
- 3.8m Octagonal
Measurements in mm. To be used as a guide onlyMeasurements taken as if umbrella was mounted on a bolt down base plate, different base option eg. Sand Water Base will increase the height.
|
SIZE |
3.5m Octagonal |
3.8m Octagonal |
3.0m Square |
Area (m²) |
9.2m² |
11m² |
9.0m² |
A |
3500 |
3800 |
3000 |
B |
2460 |
2449 |
2460 |
C |
2000 |
2000 |
2000 |
D |
3800 |
4090 |
3440 |
E |
400 |
420 |
400 |
F |
790 |
754 |
- |
G |
2580 |
2705 |
- |
Measurements in mm. To be used as a guide only Measurements taken as if umbrella was mounted on a bolt down base plate, different base option eg. Sand Water Base will increase the height. |
|
|
|
|
Frame |
Rust Resistant Aluminium - Available in Charcoal Powdercoated or Silver Anodised |
Opening |
Winder System |
Tilt |
Horizontal left-right tilt and infinite vertical tilt |
Cover Size |
Large Cantilever |
Base Options |
Please see below under "INSTALLATION" for details on bases |
FABRIC
The Sunhaven Cantilever canopy is made with acrylic fabric that is solution-dyed, meaning that it is colourfast. It has also been treated to make the shade UPF50+ so that it will block up to 98% of UV rays. It is also highly water-resistant and has a four year warranty. For the best possible lifespan, use the complimentary cover when not in use.
FABRIC COLOURS
|
|
|
|
|
|
Black |
Charcoal Grey |
Charcoal Tweed |
Smokey Grey |
Light Grey Marle |
Beige |
*Please note: Colours may vary slightly between screens and the actual product.
WARRANTY
The Sunhaven comes with a 4 Year Fabric Warranty and a 12 month workmanship warranty on the frame.
FRAME
Heavy duty rust-resistant aluminium makes up the frame of the Sunhaven and is fitted out with stainless steel hardware. It has a 40km/h wind rating and is available in two styles: powdercoated matte charcoal, and matte silver anodised aluminium.
This frame is opened, closed, and tilted both vertically and horizontally with the multi-use grip and detachable crank winder. The frame also allows for 360° rotation with the use of a foot pedal.
FRAME COLOURS
The Sunhaven is available with two frame variations: powdercoated and silver anodised.
The powdercoated frame is charcoal and is the standard option for the Sunhaven cantilever umbrella with a matte finish. This gives it a water and rust-resistant coating.
The silver anodised frame creates a frosted, matte appearance on the aluminium and retains its silver colour. This frame option is also water and rust-resistant.
INSTALLATION
There are multiple ways the Sunhaven cantilever umbrella can be installed and you are able to choose which option you prefer when purchasing the Sunhaven!
|
|
|
|
|
On Ground Crossbar Base
|
Bolt Down Baseplate
|
Inground Base
|
Water Sand Resin Base
|
Block Frame Galvanised Base |
Castor wheels available: No
|
Castor wheels available: No
|
Castor wheels available: No
|
Castor wheels available: Yes
|
Castor wheels available: Yes |
1x1m size and powdercoated.
Requires 6-8 ballast blocks or pavers which need to be 450-500mm square and can be sourced from a hardware or nursery store.
Castor wheels are not compatible with this base.
|
Hot-dip galvanised baseplate for optimum rust-resistance. Measures 180x180x10mm and requires 4 x M12 anchor bolts to be secured to a 100mm thick reinforced concrete slab.
|
Hot-dip galvanised inground base specific to the Sunhaven. Dimensions are 13.5 x 13.5 x 0.6mm and requires 4 stainless steel bolts.
|
A UV treated plastic base inside which four square reservoirs can be filled with water and sand in order to make up the 130-160kg recommended weight. Dimensions 850x850x180mm.
Lockable stainless steel castor wheels available as optional extra.
|
A galvanised and powdercoated steel base frame in which can be placed up to 12 x 14kg blocks or pavers measuring 40x40x4mm for a total weight of around 200kg.
Lockable stainless steel castor wheels available as optional extras.
|
RECOMMENDED ACCESSORIES
SPARE PARTS
After a replacement part for your Sunhaven Classic Cantilever Umbrella? We stock spares! We can also give friendly advice if you need a hand. Give us a call on 1800 155 233!
FINAL COMMENTS
The Sunhaven cantilever umbrella introduces a left-right tilting function that similar-sized cantilevers do not possess which makes it an exciting new option for shade seekers.